How to tap Vention extrusions

Certain connectors like the 45mm x 45mm In-line Mounting Block, 45 Degree Inline Connector with Locators, and 3-Way Extrusion End Connector, (as well as other parts like leveling feet) require tapping of extrusions. 

This can be achieved in 3 main ways: by hand with a tap, by drill with a tap, or finally with a drill via self-tap.  

The full guide can be found here: Tapping Vention Extrusions

Components required for tapping can be found here:

• M8x1.25mm Tap 
• T-Handle for Tap
• Tapping Fluid
• Full Kit